Skip to content
2000
  1. Home
  2. A-Z Publications
  3. Current Applied Polymer Science
  4. Volume 4, Issue 2
  5. Article
Volume 4, Issue 2
  • ISSN: 2452-2716
  • E-ISSN: 2452-2724

Abstract

The mixing of the formation water present in oil and gas reservoirs and the injected water (often seawater) can form inorganic incrustations, during enhanced oil recovery operations. In this case, the cations (calcium, barium, strontium, iron, magnesium, .) of the injected water react with the anions (mainly sulfate and carbonate) of the formation water and produce inorganic salts that can precipitate in the reservoir rock, damaging the oil production by clogging the pipes and production lines. One of the ways to prevent this problem is to remove the cations from the injected water, but this is a challenging procedure.

In this study, the Sulfonated polymer(divinylbenzene) (DVBS) and the copolymer sulfonated poly(methyl methacrylate-co-divinylbenzene (MMA-DVB) were compared in their efficiencies in reducing, to a very low level, the concentration of removing, chemically modified with sulfonic (S) groups to ascertain their performance, the calcium and magnesium ions present in water.

The resins were modified with sulfonic groups and characterized. We used central composition planning with batch tests to evaluate the adsorption, which occurred significantly for both ions using both resins with a contact time of 10 minutes.

For both resins, calcium was preferentially adsorbed in relation to magnesium.

Taking into account the cost-benefit, the copolymer MMA-DVBS (a less expensive adsorbent than the polymer DVBS) presented a satisfactory behavior, making it a potential material for the treatment of water.

© 2021 Bentham Science Publishers
Loading

Article metrics loading...

/content/journals/caps/10.2174/2452271604666210108093520
2021-08-01
2025-01-10

  • From This Site

    /content/journals/caps/10.2174/2452271604666210108093520
    dcterms_title,dcterms_subject,pub_keyword
    -contentType:Contributor -contentType:Concept -contentType:Institution
    10
    5
Loading full text...

Full text loading...

References

  1. AversaT.M. QueirósY.G.C. LucasE.F. LouvisseA.M.T. Synthesis and sulfonation of macroporous polymeric resins and their assessment for removal of oil and aniline from water.Polim Cienc Tecnol2014241455110.4322/polimeros.2013.048
     [Google Scholar]
  2. MahmoudM.A. Evaluating the damage caused by calcium sulfate scale precipitation during low- and high-salinity-water injection.J. Can. Pet. Technol.201453314115010.2118/164634‑PA
     [Google Scholar]
  3. PatilA. NandaJ. WaikarJ. Treatment of produced water using chelating resins: laboratory case studyProceedings of the SPE International Symposium on Oilfield Chemistry.Texas, USAThe Woodlands201511410.2118/173742‑MS
     [Google Scholar]
  4. ZhouY.B. TangX.Y. HuX.M. FritschiS. LuJ. Emulsified oily wastewater treatment using a hybrid-modified resin and activated carbon system.Separ. Purif. Tech.200863240040610.1016/j.seppur.2008.06.002
     [Google Scholar]
  5. LelesP.G. NascimentoM.A. CruzJ.C. SouzaP.V.F. LopesR.P. Study of the Chromium(VI) removal from aqueous systems by cobalt nanoparticles.Quim. Nova201942549750410.21577/0100‑4042.20170363
     [Google Scholar]
  6. LingC. LiuF.Q. LongC. WeiM.M. LiA. Highly efficient co-removal of copper (II) and phthalic acid with self-synthesized polyamine resin.Water Sci. Technol.20146991879188510.2166/wst.2014.08224804663
     [Google Scholar]
  7. ZhangH. XiongC. LiuF. ZhengX. JiangJ. ZhengQ. YaoC. Optimization of conditions for Cu(II) adsorption on D151 resin from aqueous solutions using response surface methodology and its mechanism study.Water Sci. Technol.201469122446245110.2166/wst.2014.16324960006
     [Google Scholar]
  8. ElvanH. OzdesD. DuranC. SahinD. TufekciM. BahadirZ. Separation and preconcentration of copper in environmental samples on Amberlite XAD-8 resin after complexation with a carbothioamide derivative.Quim. Nova201336683183510.1590/S0100‑40422013000600016
     [Google Scholar]
  9. AversaT.M. SilvaC.M.F. RochaQ.C. LucasE.F. Synthesis, characterization and evaluation of two crosslinked polymeric resins and their comparison with walnut shell in oil removal from water.J Environ Sci Health A Tox Hazard Subst Environ Eng201651863463910.1080/10934529.2016.115987227050484
     [Google Scholar]
  10. AversaT.M. da SilvaC.M.F. da RochaP.C.S. LucasE.F. Influence of exchange group of modified glycidyl methacrylate polymer on phenol removal: A study by batch and continuous flow processes.J. Environ. Manage.201618230130710.1016/j.jenvman.2016.07.08227494606
     [Google Scholar]
  11. SilvaC.M.F. RochaP.C.S. AversaT.M. LucasE.F. Removal of petroleum from aqueous systems by poly(divinylbenzene) and poly(methyl methacrylate-divinylbenzene) resins: isothermal and kinetic studies.Chem Chem Technol201913339940610.23939/chcht13.03.399
     [Google Scholar]
  12. MasqueN. MarceR.M. BorrullF. New polymeric and other types of sorbents for solid-phase extraction of polar organic micropollutants from environmental water.Trac-Trends Anal Chem199817638439410.1016/S0165‑9936(98)00019‑3
     [Google Scholar]
  13. León-GonzálezM.E. Pérez-ArribasL.V. Chemically modified polymeric sorbents for sample preconcentration.J. Chromatogr. A2000902131610.1016/S0021‑9673(00)00942‑011192161
     [Google Scholar]
  14. Rodrigues FilhoG. AssunçãoR.M.N. MarquesF.C.A. Síntese de poliestireno sulfonado para aplicações no tratamento de água produzido a partir de copos e bandejas descartadas de poliestireno.Quim. Nova20083182004200810.1590/S0100‑40422008000800017
     [Google Scholar]
  15. Fakhru’l-RaziA. PendashtehA. AbdullahL.C. BiakD.R.A. MadaeniS.S. AbidinZ.Z. Review of technologies for oil and gas produced water treatment.J. Hazard. Mater.20091702-353055110.1016/j.jhazmat.2009.05.04419505758
     [Google Scholar]
  16. LiP. YangL. HeX. Synthesis of PGMA microspheres with amino groups for high-capacity adsorption of Cr(VI) by cerium initiated graft polymerization.Chin. J. Chem. Eng.20122019510410.1016/S1004‑9541(12)60368‑1
     [Google Scholar]
  17. CavalcanteF.R. SantanaG.C. ChavesE.M. KodelK.A. SouzaD.N. Development of electromagnetic device for prevention of the incrustation process in oil pipelines.Innov Technol Manag J201221111
     [Google Scholar]
  18. DejaegherB. HeydenY.V. Experimental designs and their recent advances in set-up, data interpretation, and analytical applications.J. Pharm. Biomed. Anal.201156214115810.1016/j.jpba.2011.04.02321632194
     [Google Scholar]
  19. MassartD.L. VandeginsteG.M. BuydensL.M.C. JongS. LewiP.J. Smeyers-VerbekJ. Handbook of chemometrics and qualimetrics.AmsterdamElsevier Science1977
     [Google Scholar]
  20. LundstedtT. SeifertaE. AbramobL. Experimental design and optimization.Chemom. Intell. Lab. Syst.1998421-234010.1016/S0169‑7439(98)00065‑3
     [Google Scholar]
  21. BezerraM.A. SantelliR.E. OliveiraE.P. VillarL.S. EscaleiraL.A. Response surface methodology (RSM) as a tool for optimization in analytical chemistry.Talanta200876596597710.1016/j.talanta.2008.05.01918761143
     [Google Scholar]
  22. AbpdourM MoghadasBK TamjidiS Equilibrium and kinetic study of simultaneous removal of Cd (II) and Ni (II) by acrylamide-based polymer as effective adsorbent: optimisation by response surface methodology (RSM).Int J Environ Anal Chem2020(ahead of print).10.1080/03067319.2020.1772768
     [Google Scholar]
  23. AhmedM. MalikM.A. PervezS. RaffiqM. Effect of porosity on sulfonation of macroporous styrene-divinylbenzene beads.Eur Polym J20044081609161310.1016/j.eurpolymj.2004.04.013
     [Google Scholar]
  24. BoxG.E.P. HunterW.G. HunterJ.S. Statistics for experimenters.New YorkJohn Willey1978
     [Google Scholar]
  25. TettehE.K. RathilalS. Effects of a polymeric organic coagulant for industrial mineral oil wastewater treatment using response surface methodology (RSM).Water S.A.201844215516110.4314/wsa.v44i2.02
     [Google Scholar]
  26. General coordination of accreditation. Guidance on validation of analytical methods.Available from: http://www.inmetro.gov.br/Sidoq/Arquivos/CGCRE/DOQ/DOQ-CGCRE-8_04.pdf
  27. National Institute of Metrology, Quality and Technology. Guidance on validation of analytical methods: DOQ-CGCRE-008.Available from: https://www.ufjf.br/baccan/files/2011/05/Validacao-Inmetro.pdf
  28. BritoN.M. JuniorO.P.A. PoleseL. RibeiroM.L. Validation of analytical methods: strategy and discussion. Pesticidas:Rev Ecotoxicol Meio Amb200313129146
     [Google Scholar]
  29. IvanovaV. SurlevaA. KolevaB. Validation of ion chromatographic method for determination of standard inorganic anions in treated and untreated drinking water. IOP Conference Series:Mat Sci Eng2018374101205310.1088/1757‑899X/374/1/012053
     [Google Scholar]
  30. PerezJ.V.D. NadresE.T. NguyenH.N. DalidaM.L.P. RodriguesD.F. Response surface methodology as a powerful tool to optimize the synthesis of polymer-based graphene oxide nanocomposites for simultaneous removal of cationic and anionic heavy metal contaminants.RSC Advances2017730184801849010.1039/C7RA00750G
     [Google Scholar]
  31. DoraswamyK. NagarajuV. SrinivasuluR. RamanaP.V. Controlled drug release studies of valsartan using differently sulfonated methacryloxyacetophenone and methyl methacrylate copolymer resins as drug carriers.J. Appl. Pharm. Sci.2013311110116
     [Google Scholar]
  32. SilversteinM.R. WebsterF.X. KiemleD.J. Spectrometric identification of organic compounds.New YorkJohn Wiley & Sons2005
     [Google Scholar]
  33. SobiesiakM. Analysis of structure and properties of DVB–GMA based porous polymers.Adsorption20192525726610.1007/s10450‑018‑9998‑2
     [Google Scholar]
  34. CoutinhoF.M.B. SouzaR.R. GomesA.S. Synthesis, characterization and evaluation of sulfonic resins as catalysts.Eur. Polym. J.20044071525153210.1016/j.eurpolymj.2004.02.003
     [Google Scholar]
  35. CareyF.A. Química orgânica.São PauloAMGH Editora2011
     [Google Scholar]
  36. MalikM.A. AliS.W. AhmedI. Sulfonated styrene-divinybenzene resins: Optimizing synthesis and estimating characteristics of the base copolymers and the resins.Ind. Eng. Chem. Res.20104962608261210.1021/ie902057x
     [Google Scholar]
  37. ToroC.A. RodrigoR. CuellarJ. Sulfonation of macroporous poly(styrene-co-divinylbenzene) beads: Effect of the proportion of isomers on their cation exchange capacity.React. Funct. Polym.20086891325133610.1016/j.reactfunctpolym.2008.06.010
     [Google Scholar]
  38. StahleL. WoldS. Analysis of variance (ANOVA).Chemom. Intell. Lab. Syst.19896425927210.1016/0169‑7439(89)80095‑4
     [Google Scholar]
  39. AlghamdiM.M. El-ZahharA.A. IdrisA.M. SaidT.O. SahlabjiT. El NemrA. Synthesis, characterization, and application of a novel polymeric-bentonitemagnetite composite resin for water softening.Separ. Purif. Tech.201922435636510.1016/j.seppur.2019.05.037
     [Google Scholar]
  40. RivasB.L. PereiraE.D. Moreno-VillosladaI. Water-soluble polymer–metal ion interactions.Prog. Polym. Sci.200328217320810.1016/S0079‑6700(02)00028‑X
     [Google Scholar]
  41. KuyucakN. VoleskyB. Accumulation of cobalt by marine alga.Biotechnol. Bioeng.198933780981410.1002/bit.26033070318587987
     [Google Scholar]
  42. Sigma-Aldrich. Products.Available from: https://www.sigmaaldrich.com/PK/en
    [Google Scholar]
/content/journals/caps/10.2174/2452271604666210108093520
Loading
Performance of Resins Based on Poly(Divinylbenzene-co-Methyl Methacrylate) for Removal of Calcium and Magnesium Ions from Water
Curr Appl Polym Sci 4, 107 (2021); https://doi.org/10.2174/2452271604666210108093520
/content/journals/caps/10.2174/2452271604666210108093520
/content/journals/caps/10.2174/2452271604666210108093520
Loading

Data & Media loading...


  • Article Type:     Research Article
Keyword(s): adsorption; calcium ions; ion exchange; magnesium ions; polymeric resins; Water treatment

Most Cited Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error
Please enter a valid_number test