Skip to content
2000
Volume 18, Issue 3
  • ISSN: 2666-1454
  • E-ISSN: 2666-1462

Abstract

Introduction

Augmenting concern towards effective utilization of agro waste into useful products has formented the scientific community to look for alternate sources of materials. On a circular economy contemplation, natural fibers extricated from agro waste have a potential headway towards the evolution of newer materials.

Methods

The current research activity is focused on the optimization of influential parameters, namely fiber volume, load, sliding distance and sliding velocity on the wear characteristics of inflorescence fiber-fortified epoxy composites. Coconut Inflorescence fiber is selected as reinforcement material for the present work. NaOH treatment at 5% wt/vol for 1 hour towards removal of amorphous contents present in the fibers. Taguchi-inspired L16 orthogonal array is used for the design of experiments using Minitab software. The control factors chosen for the optimization study are namely fiber content (10 mm, 15 mm, 20 mm and 25 mm), a load of (5 N, 10N, 15 N and 20 N), a sliding distance of (200 m, 400 m, 600 m and 800 m) and sliding velocity of (6 m/s, 12 m/s, 18 m/s and 24 m/s).

Results

The optimal combination of parameters, namely fiber content of 20 wt%, load of 5N, a sliding distance of 600 m and sliding velocity of 24 m/s, contributed to the merest wear rate of 4.328 m3/N.m. Morphological evaluation of the composites revealed agglomeration of fibers in the matrix, thereby, the matrix was not able to transfer load uniformly.

Conclusion

Leading to failure of composites as a result of wear rate increase. Thus, inflorescence fiber-fortified epoxy composites fabricated on the above-mentioned control factors will have better wear rate for futuristic applications.

Loading

Article metrics loading...

/content/journals/cms/10.2174/0126661454277271231120102555
2023-12-04
2025-06-19
Loading full text...

Full text loading...

References

  1. KarimahA. RidhoM.R. MunawarS.S. A review on natural fibers for development of eco-friendly bio-composite: Characteristics, and utilizations.J. Mater. Res. Technol.2021132442245810.1016/j.jmrt.2021.06.014
    [Google Scholar]
  2. AwaisH NawabY AmjadA Environmental benign natural fibre reinforced thermoplastic composites: A review.Composites Part C: Open Access20214100082
    [Google Scholar]
  3. CruzJ. FangueiroR. Surface modification of natural fibers: A review.Procedia Eng.201615528528810.1016/j.proeng.2016.08.030
    [Google Scholar]
  4. CordinM. BechtoldT. PhamT. Effect of fibre orientation on the mechanical properties of polypropylene–lyocell composites.Cellulose201825127197721010.1007/s10570‑018‑2079‑6
    [Google Scholar]
  5. VijayanD. Influence of stacking sequence on mechanical and metallurgical properties of ramie/areca laminates using b4c nano filled epoxy resin.J. Nat. Fibers2020117
    [Google Scholar]
  6. Keerthi GowdaB.S. NareshK. IlangovanS. SanjayM.R. SiengchinS. Effect of fiber volume fraction on mechanical and fire resistance properties of basalt/polyester and pineapple/polyester composites.J. Nat. Fibers2021115
    [Google Scholar]
  7. JiangB. LiuC. ZhangC. WangB. WangZ. The effect of non-symmetric distribution of fiber orientation and aspect ratio on elastic properties of composites.Compos., Part B Eng.2007381243410.1016/j.compositesb.2006.05.002
    [Google Scholar]
  8. DevadasA. NirmalU. HossenJ. Investigation into mechanical & tribological performance of kenaf fibre particle reinforced composite.Cogent Eng.201851147921010.1080/23311916.2018.1479210
    [Google Scholar]
  9. LiuY. LvX. BaoJ. Characterization of silane treated and untreated natural cellulosic fibre from corn stalk waste as potential reinforcement in polymer composites.Carbohydr. Polym.201921817918710.1016/j.carbpol.2019.04.088 31221319
    [Google Scholar]
  10. SoundarrajanK. Physio-mechanical and chemical behaviour of surface modified coconut inflorescence fiber.SAE Technical Paper2021
    [Google Scholar]
  11. UmeshG.L. RudreshB.M. KrishnaprasadN.J. Exploring the sliding wear behavior of PA66/PA6 blend nano composites: Influence of load and velocity.IRJET2020718
    [Google Scholar]
  12. PandaJ.N. BijweJ. PandeyR.K. Optimization of the amount of short glass fibers for superior wear performance of PAEK composites.Compos., Part A Appl. Sci. Manuf.201911615816810.1016/j.compositesa.2018.10.034
    [Google Scholar]
  13. KarthikS. ArunachalamV.P. Prem SundharM. RaghulR. SukumarC. Optimization on the dry sliding wear behaviour of mercerized coconut inflorescence fibril fortified unsaturated polyester composites.IOP Conf. Series: Mater. Sci. Eng.202099301213610.1088/1757‑899X/993/1/012136
    [Google Scholar]
  14. KumarR.S. MuralidharanN. SathyamurthyR. Optimization of alkali treatment process parameters for kenaf fiber: Experiments design.J. Nat. Fibers2020110
    [Google Scholar]
/content/journals/cms/10.2174/0126661454277271231120102555
Loading
/content/journals/cms/10.2174/0126661454277271231120102555
Loading

Data & Media loading...

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error
Please enter a valid_number test