Skip to content
2000
Volume 6, Issue 1
  • ISSN: 2213-3356
  • E-ISSN: 2213-3364

Abstract

Introduction: New methods for preparing surface modification of flame retardant cotton fabrics were employed by applying a microwave-assisted technique with a minimum amount of co-solvent. Efforts at flame retardant cotton fabrics treated with economic and environmentally friendly flame retardant compounds based on the small molecules piperazine, PN and PNN, were done successfully. Methods and Results: The evidence of flame retardant chemical penetrations or surface modification of cotton fabrics was confirmed by Scanning Electron Microscope (SEM), and the treated cotton fabrics were evaluated by flammability tests, such as 45°angle (clothing textiles test) and limiting Oxygen Index (LOI). Thermogravimetric analysis of all treated cotton fabrics in a nitrogen atmosphere showed high thermal stability, as decomposition occurred between 276.9~291.2°C with 30.5~35.7% residue weight char yield at 600°C. Limiting Oxygen Index (LOI) and the 45° angle flammability test were used to determine the efficiency of the flame-retardant treatments on the fabrics. LOI values for control twill fabric showed ~18 vol% oxygen in nitrogen, whereas the highest treatment level had 32 vol%. High add-on treatments with flame retardants also readily passed the 45° angle flammability test. Conclusion: In the Microscale Combustion Calorimeter (MCC) tests, a decline in heat of combustion was shown through the smaller values acquired for THR, HRC and Tmax for all PN and PNN samples.

Loading

Article metrics loading...

/content/journals/cmic/10.2174/2213335606666190301160053
2019-01-01
2025-07-11
Loading full text...

Full text loading...

/content/journals/cmic/10.2174/2213335606666190301160053
Loading
This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error
Please enter a valid_number test